Home > Wall Systems > Modular Wall Systems


Modular Wall Systems - Product Information

Modular in The Construction for Quick & Easy Expansions or Classification Up-Grades

Modular Wall System

Modular Construction Cleanroom/CER Wall Systems

Pacific Environmental Technologies offers a variety of modular wall designs that range from the simple & cost effective (economical) to more elaborate finishes cores and structural capabilities (high end). Regardless of your requirements, it is likely that one of Pacific Environmental Technologies's Versawall systems will meet your needs. The modular wall systems can be purchased as a kit or on an installed basis. All the components will be prefabricated and quality checked to simplify the installation process. Versawall systems can be purchased as part of a Modular Clean Isolator System (MCIS) or for other requirements that you may have.


Versawall I System:

Versawall I is a simple economical solution to a modular wall requirement. It can be used in low to medium end cleanrooms and laboratories that don't require a high structural capacity. Finished on both sides it installs quickly and covers both basic performance and visual appeal (high tech look). It is versatile, can be easily relocated, expanded or modified.

    Standard features:
  • Aluminum batten/framing and panel system
  • Framing system and panels are finished identically both sides
  • Modular Wall System
  • 2" , 3" or 4" thick systems
  • 8', 10', or 12' heights
  • Framing system finishes include:
  • Anodized Aluminum
  • Powder Coated Aluminum
  • Panel finishes include:
  • Melamine-vinyl
  • High pressure plastic laminate
  • Kydex
  • FRP
  • Aluminum (factory enamel or anodized)
  • Core materials include:
      Modular Wall System
    • Paper core
    • Foam core (styrene, poly iso)
    • Plastic core
    • Aluminum honeycomb
  • Standard Equipment:
    • Doors and hardware
    • Specialty hardware (panic, maglocks)
    • Windows- single and dual pane
    • Return air grilles (prefiltered and dampered)
    • Integrated convenience outlets, light switches
    • Finished openings for pass thrus, conveyors and utilities
    • Backing for hanging shelving

Versawall II System:

Versawall II is a simple to install, high R-value, structurally high performance (load bearing), minimimal seams for cleanability. Due to its high insulation value and structural capacity it is ideal for applications where one side of the wall will be in a unconditioned area or high humidity area and when used as a deck to support equipment or heavy ceiling loads.

Modular Wall System
    Standard Features:
  • Internal framing and integrated panel finish
  • No exposed battens
  • System is finished identically both sides
  • 2", 3", 4" or 5" thick systems
  • 8' - 16' heights
  • Internal framing system (not exposed):
  • High density foam
  • Aluminum
  • Kiln dried wood
  • Panel Finishes Include:
    • Factory white steel
    • Factory white galv-alum
    • FRP
    • Kydex
    • PVC
    • Modular Wall System
    • Polypropylene
    • Stainless Steel
    • Aluminum
  • Core materials include:
    • Foam core (poly iso)
  • Standard Equipment:
    • Doors and hardware
    • Specialty hardware (panic, maglocks)
    • Windows- single and dual pane
    • Return air grilles (prefiltered and dampered)
    • Integrated convenience outlets, light switches
    • Finished openings for pass throughs, conveyors and utilities
    • Backing for hanging shelving

Versawall III System:

Versawall III is ideal for applications where a clean area/zone needs to be adjacent to an equipment room or utility chase. Easy to modify, rearrange and expand. The studs make an ideal system to rack/hang process piping and equipment from. Bulk heading of equipment is easy.

Modular Wall System
    Standard Features:
  • Strut framing and batten with discreet panel (no exposed battens)
  • System is finished on one or both sides
  • Single side is typically used in "service chase/equipment chase" applications
  • Double side is typically used to provide a finished look on both sides as in a hallway.
  • 2?" - 6?" thick system (strut and panel):
    • The strut/stud is typically 2", 3" or 6"
    • The panels are standard ?" thick
    • (other thicknesses are available)
  • 8' - 20' heights
  • Panel finishes include:
    • Factory white steel
    • Factory white galv-alum
    • FRP
    • Kydex
    • Pvc
    • Polypropylene Modular Wall System
    • Stainless Steel
  • Strut framing system:
    • Steel (powder coat white or galvanized)
    • Aluminum strut (anodized or powder coat white)
  • Core materials include:
    • Plastic core
    • Aluminum honeycomb
  • Standard features:
    • Doors and hardware
    • Specialty hardware (panic, maglocks)
    • Windows- single and dual pane
    • Return air grilles (prefiltered and dampered)
    • Integrated convenience outlets, light switches
    • Finished openings for pass thrus, conveyors and utilities
    • Backing for hanging shelving